| Validation - V1 - 212 documents |
| [V1.01.100] ZZZZ100 – Functions and formulas |
| [V1.01.101] ZZZZ101 - Validation of the operators AFFE_CARA_ELEM and POST_ELEM |
| [V1.01.102] ZZZZ102 – Reading accelerogram and oscillator spectrum |
| [V1.01.106] ZZZZ106 – Geometric criteria for DEFI_GROUP |
| [V1.01.107] RCCM01 - Operator POST_RCCM |
|
[V1.01.108] ZZZZ108 - Test of the application interface Aster-MISS3D
restricted access |
| [V1.01.110] ZZZZ110 - Validation of the operator PROJ_CHAMP / ELEM (in 2D and wired) |
| [V1.01.111] ZZZZ111 - Validation of the operator DEFI_CABLE_BP |
| [V1.01.112] ZZZZ112 - Cylinder with variable pressure. Validation of LIRE_PLEXUS |
|
[V1.01.114] ASPIC03 - operational Bypass in linear elasticity
restricted access |
|
[V1.01.116] ASCOU05 - healthy elbow, linear elastic design
restricted access |
| [V1.01.118] ZZZZ118 - non regression testing of INCLUDE_MATERIAU restricted access |
| [V1.01.119] ZZZZ119 - PROJ_CHAMP for 3D surfaces |
| [V1.01.120] ZZZZ120 - Calculation of a bolt-flange assembly restricted access |
| [V1.01.121] ZZZZ121 – Mesh adaptation with HOMARD |
|
[V1.01.122] ASPIC04 - fissured Bypass: short crack not emerging in inclined position, weld of the type 2, mesh only
restricted access |
|
[V1.01.123] ASPIC05 - fissured Bypass: long crack not emerging in right position, weld of the type 1, penetrating bypass, mesh only
restricted access |
|
[V1.01.124] ASPIC06 - Bypass with axisymmetric crack emerging in offsite skin in right position, weld of the type 2, mesh only
restricted access |
| [V1.01.126] ZZZZ126 - Validation of the operator CREA_CHAMP OPERATION : 'ASSE' |
| [V1.01.127] ZZZZ127 - Validation of the keyword LIAISON_MAIL of the command AFFE_CHAR_MECA |
| [V1.01.128] ZZZZ128 - Validation of the operators LIRE_TABLE and IMPR_TABLE |
|
[V1.01.132] ASCOU06 - right Tube with transition from thickness to a slope and under-thickness, linear elastic design
restricted access |
|
[V1.01.133] ASCOU07 - right Tube with transition thickness to two slopes and short circumferential crack, linear elastic design
restricted access |
|
[V1.01.134] ASCOU08 - Coude with longitudinal long crack, linear elastic design
restricted access |
|
[V1.01.135] ASCOU09 - Coude with circumferential long crack, linear elastic design
restricted access |
| [V1.01.136] ZZZZ136 – Validation of POST_RELEVE_T |
|
[V1.01.138] ASCOU10 - Tube with axisymmetric under-thickness with the intersections Tube-Nozzle, linear elastic design
restricted access |
|
[V1.01.139] ASCOU11 - Quart of elbow with axisymmetric under-thickness, mesh only
restricted access |
|
[V1.01.140] ASCOU12 - Coude with on thickness and under-thickness with the same azimuth, linear elastic design
restricted access |
|
[V1.01.141] ASCOU13 - Coude with extra thickness and elliptic under-thickness
restricted access |
|
[V1.01.142] ASCOU14 - Coude with multiple under-thickness, linear elastic design
restricted access |
|
[V1.01.143] ASCOU15 - Coude with longitudinal short crack in linear elasticity
restricted access |
|
[V1.01.146] ASCOU18 - right Tube with transition thickness to a slope comprising an axisymmetric crack
restricted access |
|
[V1.01.147] ASPIC07 - Bypass with weld of the type 1 and fissures long emerging in internal skin in position inclined in linear elasticity
restricted access |
|
[V1.01.148] ASPIC08 - operational Bypass. Linear and elastic computation thermal linear
restricted access |
|
[V1.01.149] ASPIC09 - Bypass with weld of the type 1 and fissures long tilted axisymmetric emerging in internal skin in position inclined in linear thermoelasticity
restricted access |
|
[V1.01.157] ASCOU19 - Coude with a circumferential long crack emerging in internal skin
restricted access |
| [V1.01.159] ZZZZ159 - Identification of an elastoplastic behavior law from a tensile test |
| [V1.01.161] ZZZZ161 – Data transfer with the MED format |
| [V1.01.164] ZZZZ164 - Validation of the keyword TRANSLATION, ROTATION, MODI_BASE and ECHELLE of the MODI_MAILLAGE command |
| [V1.01.165] ZZZZ165 - LIRE_RESU in IDEAS format |
|
[V1.01.166] ZZZZ166 - Computation of flow in thermal
|
|
[V1.01.168] ASCOU16 - Coude with a longitudinal short crack, nonlinear thermoelastic computation
restricted access |
|
[V1.01.169] ASCOU17 - Coude with longitudinal long crack
restricted access |
| [V1.01.175] ZZZZ175 - Coupling Aster and HOMARD on a non-linear problem with STAT_NON_LINE |
|
[V1.01.177] ZZZZ177 - Validation of the operations on the arrays
|
|
[V1.01.180] ZZZZ180 - analytical Tests related to the generation of random signals with GENE_FONC_ALEA
|
| [V1.01.185] ZZZZ185 - Validation of the MODI_MAILLAGE command with SYMETRIE and of the PROJ_CHAMP command with DISTANCE_MAX |
| [V1.01.189] ZZZZ189 – Circumferential orientation by a Python loop |
|
[V1.01.200] ZZZZ200 - Test of RIGI_PARASOL and RIGI_MISS_3D
restricted access |
| [V1.01.205] ZZZZ205 - Calculation of the kinetic energy of a rectangular plate |
|
[V1.01.209] ASCOU20 - Coude with axisymmetric under-thickness, linear elastic design
restricted access |
|
[V1.01.210] ASCOU21 - Coude with elliptic under-thickness, linear elastic design
restricted access |
|
[V1.01.211] ASCOU22 - Coude with multiple under-thickness, linear elastic design
restricted access |
|
[V1.01.212] ASCOU23 - Coude with a circumferential long crack emerging in internal skin
restricted access |
| [V1.01.215] ZZZZ215 – Coupling Code_Saturne and Code_Aster in 3D |
|
[V1.01.218] ZZZZ218 - Validation of command MACR_ECREVISSE
restricted access |
| [V1.01.223] ZZZZ223 - Validation CREA_RESU / ASSE and AFFE_MATERIAU / AFFE_VARC / FONC_INST |
| [V1.01.224] ERREU01 - Error messages verification for the subroutines CALCUL and PRERES |
| [V1.01.225] ERREU02 – Verification for missing control variables |
| [V1.01.226] PYNL01 – Numerical integration of the VMIS_ISOT_LINE behavior law with the CALCUL command |
| [V1.01.229] ZZZZ229 - Validation of the command AFFE_CHAR_MECA / LIAISON_SOLIDE + TRAN + ANGL_NAUT |
| [V1.01.230] ZZZZ230 - Implementation of the "structural zoom" technique on a 2D problem |
| [V1.01.231] ZZZZ231 - Validation of the contact in initial geometry |
| [V1.01.234] ZZZZ234 - Reference values verification for the beams, rods, cables, discrete elements |
|
[V1.01.235] PLEXU01 - Validation elementary of command CALC_EUROPLEXUS
|
| [V1.01.237] ZZZZ237 - Validation of LIAISON_UNIL and TOLE_APPA |
|
[V1.01.238] ZZZZ238 - normal Displacements imposed on curved sides of hexahedrons on 20 and 27 nodes
|
| [V1.01.242] PERF001 - Calculation of elastic hollow ring subjected to internal pressure |
| [V1.01.243] PERF002 - Calculation of a thermo-elastic hollow ring subjected to thermal loading |
| [V1.01.244] PERF003 - modes of a square plate clamped on two sides |
| [V1.01.245] PERF004 - Calculation of elastoplastic hollow ring subjected to internal pressure |
| [V1.01.246] PERF005 - Hertz contact between two hemispheres |
| [V1.01.247] PERF006 – Dynamic sub-structuring : thin plate resting on the edges |
|
[V1.01.248] PLEXU02 - Vérification of command CALC_EUROPLEXUS in multi-field
|
| [V1.01.252] PERF008 - Elastic computation of a dolly subjected to thermal loading |
| [V1.01.255] ZZZZ255 - Validation of the TEST_MAIL option of the PROPA_FISS command |
|
[V1.01.256] ZZZZ256 - Validation of the combination of asymmetric matrixes
|
| [V1.01.257] ZZZZ257 - Error estimation for quantities of interest in fracture mechanics |
| [V1.01.258] ZZZZ258 - Validation of the keyword ETAT_INIT STAT_NON_LINE |
| [V1.01.259] ZZZZ259 - Mesh adaptation and boundary following in 2D |
| [V1.01.260] ERREU07 - Error messages during a prohibited change of constitutive law |
| [V1.01.261] ZZZZ261 - Validation of PROJ_CHAMP for 2D fields |
| [V1.01.262] PERF009 – Computation of an elastic RIS pump |
| [V1.01.263] PERF010 - Elastic computation a dolly in parallel |
|
[V1.01.264] ZZZZ264 - Validation of command POST_ENDO_FISS
|
| [V1.01.266] ZZZZ266 - Validation of the COOR_ELGA option of the CALC_CHAM_ELEM command |
| [V1.01.268] ZZZZ268 - Validation of POST_BORDET in 2D and 3D |
| [V1.01.269] PYNL02 - STAT_NON_LINE : separate comands for an elastic-plastic computation |
| [V1.01.271] ZZZZ271 - Validation of PROJ_CHAMP for 2D and 3D Gauss points fields |
| [V1.01.272] ZZZZ272 - Validation of EVOL_CHAR in THM |
|
[V1.01.273] PERF011 - Elastic design of a cylinder
|
| [V1.01.274] ZZZZ274 - Validation of a non-symmetric discrete finite element for a linear static calculation using MECA_STATIQUE |
| [V1.01.275] DISTR01A - Example of parametric study |
| [V1.01.276] ERREU08 - Error message in case of interpenetration |
| [V1.01.277] ERREU03 - Detection of a simple singularity in MECA_STATIQUE |
| [V1.01.278] ERREU04 - Detection of a simple singularity with separate commands |
| [V1.01.279] ERREU05 - Verification of the recovery of fatal errors in STAT_NON_LINE |
|
[V1.01.280] ERREU06 - Vérification of the operation of the Nan in Code_Aster
|
| [V1.01.281] ZZZZ281 - Compilation of the element catalog |
| [V1.01.282] ZZZZ282 - Validation of the definition of a crack on a grid DEFI_FISS_XFEM |
| [V1.01.283] ZZZZ283 - Validation of the use of a grid with a crack on an X-FEM mesh refined by HOMARD |
| [V1.01.284] ZZZZ284 - Validation of the CHAR_MECA_HYDR_R and CHAR_MECA_SECH_R options |
| [V1.01.285] ZZZZ285 - Validation of PROJ_CHAMP / Collocation |
| [V1.01.286] ZZZZ286 - Validation of movement imposed on an edge |
| [V1.01.287] ZZZZ287 - Validation of the POST_RUPTURE operator |
| [V1.01.288] PERF012 - Performance of elemental calculations in 3D |
| [V1.01.289] ZZZZ289 - Validation of the elemental matrices for the INCO elements |
| [V1.01.290] PERF013 - Performance of a modal analysis in parallel |
| [V1.01.291] ZZZZ291 - Validation of the NORME keyword of POST_ELEM |
| [V1.01.292] ZZZZ292 - Validation of SANS_GROUP_NO_FR |
| [V1.01.293] ZZZZ293 - Validation of the position of the sub-integration points of multi-fibers beams |
| [V1.01.294] ZZZZ294 - Validation of the position of the sub-integration points of 3D plates |
| [V1.01.295] ZZZZ295 - Validation of the position of the sub-integration points of 2D plates |
| [V1.01.296] ZZZZ296 - Validation of the position of the sub-integration points of pipes |
|
[V1.01.298] ZZZZ298 - Validation data-processing of POST_K1_K2_K3
|
|
[V1.01.299] ZZZZ299 - Vérification of the local coordinate systems
|
|
[V1.01.301] SUPV001 - Vérification of the operation of INCLUDE
|
|
[V1.01.302] SUPV002 - Vérification of the catalogues of messages
|
|
[V1.01.303] ERREU09 - Validation of exception handling
|
|
[V1.01.304] ZZZZ304 - Projection of a field by discontinuous elements ELNO
|
|
[V1.01.305] ZZZZ305 - Validation of DEFI_CABLE_BP
|
|
[V1.01.306] ZZZZ306 - PROJ_CHAMP / ECLA_PG
|
|
[V1.01.307] ZZZZ307 - Validation data-processing of the parallelism of elementary computations and the assemblies
|
|
[V1.01.308] ERREU10 - Validation of the stop for instability in STAT_NON_LINE
|
|
[V1.01.309] ZZZZ309 - Validation of topological options ZONE_MAJ and TORE in DEFI_GROUP
|
|
[V1.01.310] CRACK01 - Validation of Wizard Crack Analysis of the Aster modulus of Salome-Meca
|
|
[V1.01.311] PERF014 - Contact between two plates in parallel
|
|
[V1.01.312] PLEXU03 - Validation of the cables of prestressed in CALC_EUROPLEXUS
|
|
[V1.01.313] ZZZZ313 - Test of checking of numpy/lapack
|
|
[V1.01.314] ZZZZ314 - Validation data-processing of DEFI_FOND_FISS
|
|
[V1.01.315] ZZZZ315 - Validation of command PROD_MATR_CHAM (real matrix)
|
|
[V1.01.316] SUPV003 - Test of the supervisor
|
|
[V1.01.317] ZZZZ317 - Génération of seismic signals with GENE_ACCE_SEISME
|
|
[V1.01.318] ZZZZ318 - Validation of method SOUS_POINT_MATER of command PROJ_CHAMP
|
|
[V1.01.319] ZZZZ319 - Validation data-processing of MACR_ADAP_MAIL
|
|
[V1.01.320] PLEXU05 - prestressed reinforced concrete Plate under uniform pressure with model GLRC_DAMAGE
|
|
[V1.01.322] ZZZZ322 - Validation of the second reading to format MED of a field ELGA
|
|
[V1.01.323] ZZZZ323 - Validation of the printing of the local coordinate systems by IMPR_RESU/CONCEPT
|
|
[V1.01.324] ERREU11 - Validation of action REAC_PRECOND
|
|
[V1.01.325] ZZZZ325 - CALC_CHAMP / “SIRO_ELEM”
|
|
[V1.01.326] ZZZZ326 - Validation of the printing of the subpoints to format MED
|
|
[V1.01.327] PERF015 - Test of performance for the scalability of elementary computations
|
|
[V1.01.328] ZZZZ328 - Validation of CALC_CHAMP / ENEL_ELEM
|
|
[V1.01.329] ERREU12 - Validation of CONTACT_INIT with cutting
|
|
[V1.01.330] ZZZZ330 - Validation of the computation of potential energy for the beam elements
|
|
[V1.01.331] ZZZZ331 - Validation of the definition of the characteristics of shells/grids by functions of space
|
|
[V1.01.332] ZZZZ332 - Validation of CREA_RESU/EVOL_VARC
|
|
[V1.01.333] ZZZZ333 - Validation of MODI_REPERE
|
|
[V1.01.334] ERREU13 - Validation of VERI_BORNE
|
|
[V1.01.335] ERREU14 - Test of emission of the error messages for the command variables
|
|
[V1.01.336] ZZZZ336 - Validation of the taking into account of the command variables at the subpoints
|
|
[V1.01.337] ZZZZ337 - Vérification of INFO_MODE/ Parallel MACRO_MODE_MECA
|
|
[V1.01.338] PERF016 - Performances of INFO_MODE/ Parallel MACRO_MODE_MECA
|
|
[V1.01.339] ZZZZ339 - Validation of the computation of G with initial stresses in 3D
|
|
[V1.01.340] ZZZZ340 - Validation of key word TEMP_CONTINUE for AFFE_CHAR_THER
|
|
[V1.01.346] ZZZZ346 - Bifurcation of a right crack XFEM
|
|
[V1.02.001] CENTE01 - CENTENARY. Validation of POST_ELEM option WEIBULL
restricted access |
|
[V1.02.100] MAC3C01 - Coeur “TEST” of 5 fuel assemblies
restricted access |
| [V1.02.101] SSEP001 - Calculation of the load limit of a pipe with a nonuniform thickness |
| [V1.02.102] SSEP002 - Calculation of the load limit of a curved pipe with a nonuniform thickness |
|
[V1.02.103] MAC3C02 - Validation of the modelization of the water blades at the beginning of cycle
restricted access |
|
[V1.02.104] MAC3C03 - management of the permutation of the fuel assemblies
restricted access |
|
[V1.02.105] MAC3C04 - Computational simulation of the behaviour of a fuel assembly
restricted access |
|
[V1.03.111] ZMAT001 - Couplage Zmat-Code_Aster - test of tension shears
|
|
[V1.03.112] ZMAT002 - Couplage Zmat-Code_Aster - test of thermoplasticity in simple tension
|
|
[V1.03.113] ZMAT003 - Couplage Zmat-Code_Aster - use of a behavior user
|
|
[V1.03.114] ZMAT004 - Comparaison between Code_Aster and ZMAT for the MONOCRISTAL into implicit
|
|
[V1.03.115] ZMAT005 - Couplage Code_Aster - ZMAT in large deformation
|
|
[V1.03.116] ZMAT006 - Couplage Zmat-Aster in plane stresses
|
|
[V1.03.117] ZMAT007 - Comparaison between Code_Aster and Zmat- Tension on an aggregate with 10 grains
|
|
[V1.03.118] PERFE01 - Non regression of the homogenized computation of type BZ of platform PERFECT
restricted access |
|
[V1.03.119] PERFE02 - Non regression of the computation of tenacity on test-tube CT of platform PERFECT
restricted access |
|
[V1.03.120] PERFE03 - Non regression of the computation of type aggregate of platform PERFECT
restricted access |
|
[V1.03.121] ZMAT008 - multiple Tensions rotations in large deformation, isotropic hardening
|
|
[V1.03.122] ZMAT009 - Shears simple in great transformations
|
|
[V1.03.123] ZMAT010 - cubic Elasticité: comparison between Code_Aster and Zmat on an aggregate with 10 grains
|
| [V1.03.124] UMAT001 - Test of the Code_Aster Umat interface for linear thermo-elasticity |
| [V1.03.125] UMAT002 - Test of the Code_Aster Umat interface for linear elasticity under multiaxial loading |
|
[V1.03.126] MFRON01 - Test of the Code_Aster-MFront application interface with the models of Chaboche
restricted access |
|
[V1.03.127] MFRON02 - Test of the Code_Aster-MFront application interface with damage models
restricted access |
|
[V1.03.128] MFRON03 - Test of the Code_Aster-MFront application interface for models with orthotropy
restricted access |
|
[V1.04.101] FETI001 - Validation of the basic architecture of a computation FETI
|
|
[V1.04.102] FETI002 - Validation of the basic architecture of a computation FETI with rigid modes
|
|
[V1.04.103] FETI003 - Validation of a computation FETI with simple Dirichlet
|
|
[V1.04.104] FETI004 - Validation of a computation FETI with generalized Dirichlet
|
|
[V1.04.105] FETI005 - Validation of a computation FETI with simple Dirichlet with the interface
|
| [V1.04.106] FETI006 - Validation of a FETI calculation with nodal force and acceleration |
| [V1.04.107] FETI007 - Validation of the basic architecture of a FETI calculations on a cube with automatic partitioning |
| [V1.04.111] MUMPS01 - Validation of the MUMPS solver |
| [V1.04.116] PETSC01 - Validation of the PETSc solver in 3D linear elasticity |
|
[V1.04.117] PETSC02 - Validation de PETSc with the distribution of the assembled matrix
|
| [V1.10.104] GCPC002 - 3D cracked prismatic specimen |
| [V1.10.108] GCPC001 – CTJ25 specimen |
|
[V1.10.113] ASCOU01 - Elastic design linear in a fissured elbow
restricted access |
|
[V1.10.114] ASCOU02 - Coude with axisymmetric under-thickness, linear elastic design
restricted access |
|
[V1.10.116] ASCOU03 - Coude with elliptic under-thickness, linear elastic design
restricted access |
|
[V1.10.117] ZZZZ263 - Validation of simulation in civil engineer
restricted access |
|
[V1.10.119] ELSA01 - seismic Analyse nonlinear of a line of pipework
restricted access |
|
[V1.10.120] MISS01 - Validation of the MISS3D-Code_Aster sequence in the case of nuclear island EPR
restricted access |
|
[V1.10.121] MISS02 - parametric Interaction structure-ground-structure between two ships of level
restricted access |
|
[V1.10.122] MISS03 - Validation of the MISS3D_Code_Aster sequence in the case of the BK_PWR1300P'4
restricted access |
|
[V1.10.123] MISS04 - Prise in account of the depression of a structure in interaction with the ground
restricted access |
|
[V1.10.124] MISS05 - Implementation of the method of modal reduction in the MISS3D-Code_Aster sequence
restricted access |
|
[V1.10.125] MISS06 - Validation of sequence MISS3D _Code_Aster for the dynamic separation of foundation in ISS by method of springs of ground
restricted access |
|
[V1.10.126] MISS07 - Résolution harmonic of a cylinder ground dug in a semi-infinite homogeneous medium.
restricted access |
|
[V1.10.127] MISS08 - Impédances of ground under a cylindrical foundation dug in a double-layered medium
restricted access |
|
[V1.10.128] MISS09 - Impédances of ground under a rectangular foundation inserted in a homogeneous medium
restricted access |
| [V1.10.265] ZZZZ265 - Validation of the DYNA_NON_LINE command in parallel |
|
[V1.10.301] ASCOU04 - fissured Coude, nonlinear thermoelastic computation
restricted access |
| [V1.10.302] ASPIC01 - Quilting cracks: cracks in the skin leading to long-house, in an inclined position, welding-type thermo-elasticity in a linear restricted access |
| [V1.10.303] ASPIC02 - Quilting cracks: Short crack, resulting in the outer skin, upright weld type 1 in linear elasticity restricted access |
