Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is provided as a convenience.


Utilisation - U2 - 68 documents
[U2.00.01] Guide de lecture des documentations méthodologiques U2
[U2.01.02] Boundary conditions treated by elimination
[U2.01.04] Documentation of the physical quantities of Code_Aster
[U2.01.05] Stresses, forces and strains
[U2.01.09] Analytical definition of a stress field and an initial field of internal variables
[U2.01.10] Instructions for the choice of finite elements
[U2.01.11] Instructions for the manipulation of fields
[U2.02.01] Operating instructions for plates, shells and SHB elements
[U2.02.02] Operating instructions for pipe elements
[U2.03.04] Instructions for thermo-mechanical and metallurgical calculations on steels
[U2.03.05] Instructions for the numerical simulation of welding
[U2.03.06] A civil engineering calculations with pretensioning cables
[U2.03.07] Panorama des outils disponibles pour réaliser des calculs de structure de Génie Civil en béton
[U2.04.01] Conseils d'utilisation de STAT_NON_LINE
[U2.04.02] Conseils de mise en œuvre de calculs non-linéaires
[U2.04.03] Choix du comportement élasto-(visco)-plastique
[U2.04.04] Instructions for use of contact
[U2.04.05] Operating instructions for the THM model
[U2.04.06] How to dig a tunnel : excavation methodology
[U2.04.07] Using methods of transient solving for quasi-static highly nonlinear problems
[U2.04.08] Calculs statiques et dynamiques sur des ouvrages géomécaniques avec la loi de Hujeux restricted access
[U2.05.00] Guide méthodologique sur les approches en mécanique de la rupture
[U2.05.01] Fracture mechanics operators and usage tips
[U2.05.02] Operating Instructions for the X-FEM model
[U2.05.04] Operating instructions for calculating the limit load
[U2.05.05] Calculation of vibration fatigue
[U2.05.06] Performing calculations of damage in quasi-static transient
[U2.05.07] Operating instructions for cohesive zone models
[U2.05.08] Making a calculated prediction of cleavage fracture
[U2.05.09] Notice d'utilisation de la méthode GTP
[U2.06.01] Mise en œuvre d'un calcul de modes propres d'une structure
[U2.06.03] Modeling the mechanical damping
[U2.06.04] Notice for the construction of reduced dynamic models - Applications to the damping
[U2.06.05] Méthodes pour l'ISS restricted access
[U2.06.07] Analyse sismique en ISS et ISFS avec le chaînage Code_Aster – MISS3D par la commande CALC_MISS restricted access
[U2.06.08] Décollement dynamique de fondation en interaction sol-structure (ISS) par méthode de ressorts de sol restricted access
[U2.06.09] Seismic analysis : application to pipes restricted access
[U2.06.10] Civil engineering calculations with seismic loading
[U2.06.11] Analysis of the seismic resistance of large metalicl tanks
[U2.06.12] Seismic analysis with soil-structure interaction and spatial variability restricted access
[U2.06.13] General tips for using the operator DYNA_NON_LINE
[U2.06.14] Conseils de mise en œuvre des calculs en Interaction Fluide-Structure
[U2.06.15] Calcul de tenue au séisme des barrages en béton restricted access
[U2.06.31] Instructions for gyroscopic calculations
[U2.06.32] Notice de mise en œuvre de calculs de rotors
[U2.06.41] Validation de modèle dynamique par corrélation calcul-essais
[U2.06.42] Mise en œuvre de procédure de recalage modal
[U2.07.01] Instructions for the FOURIER modeling
[U2.07.02] Instructions for using the static substructuring
[U2.07.03] Realization of a study of structural modification from the measured data
[U2.07.04] Dynamic condensation of models with static substructuring
[U2.07.05] Mise en œuvre de calcul par sous-structuration dynamique
[U2.08.01] Using the error indicators and adaptative meshes strategies
[U2.08.03] Operating instructions for linear solvers
[U2.08.04] Instructions for load buckling calculations
[U2.08.05] Numerical simulation of Monte Carlo
[U2.08.06] Operating instructions for parallelism
[U2.08.07] Distribution of parametric calculations
[U2.08.08] The method of manufactured solutions for testing software
[U2.08.09] Adaptation de maillage en non-linéaire
[U2.09.01] Instructions for an analysis of crack noxiousness with the ASPIC skill module restricted access
[U2.09.02] Computation of a bolt-flange assembly
[U2.09.03] Instructions for calculation and post-processing according to RCCM restricted access
[U2.10.01] Instructions for the coupling between Code_Aster and ZMAT/UMAT modules
[U2.10.02] Notice d’utilisation de MFront avec Code_Aster
[U2.11.01] Notice d’utilisation des raccords 1D-3D
[U2.51.01] Operating instructions for Grace
[U2.51.02] Plotting curves with Code_Aster