Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2016-11-15 11:24:36

Venkatesan R
Member
Registered: 2016-04-13
Posts: 25

How to render beam element cross section in para-view

Hi Everyone
                 I have solved beam element with square cross section and I have verified the result but i can't see the real beam cross section in paraview .
is it possible to render the cross section in para-view similarly for shell element thickness?

Advance Thank you for quick reply

Warm Regards

Venkat

Offline

#2 2017-02-13 09:20:50

PATCH
Member
From: Brno, Czech Republic
Registered: 2017-01-03
Posts: 25

Re: How to render beam element cross section in para-view

Hi.

Did you figure out how to plot cross section in Paravis? I also have this problem and can not find it anywhere.

Regards,
Michal

Offline

#3 2017-02-13 17:13:58

JGWagenfeld
Member
Registered: 2016-04-01
Posts: 27

Re: How to render beam element cross section in para-view

Hey,

in case you want to visualize the subpoints of the crosssection in ParaVIS:
IMPR_RESU_SP - http://code-aster.org/doc/default/en/ma … .05.41.pdf
is what you are looking for.

I had the same question a while ago( http://code-aster.org/forum2/viewtopic.php?id=20547).

Then if you just want a visualization of the geometry, SalomeMeca/Efficas gives you the option to visualize your assigned cross-sections. (in efficas right-click on affe_cara_elem - 3D View -> this will generate the structural elements around the 1D-Geometry)


Attachments:
TUYAU_results.png, Size: 28.83 KiB, Downloads: 204

Offline

#4 2017-02-16 14:50:43

PATCH
Member
From: Brno, Czech Republic
Registered: 2017-01-03
Posts: 25

Re: How to render beam element cross section in para-view

Thank you.

Can you provide .comm file?

Offline

#5 2017-02-23 09:43:36

PATCH
Member
From: Brno, Czech Republic
Registered: 2017-01-03
Posts: 25

Re: How to render beam element cross section in para-view

So I have managed to map values of stress on subpoints in ParaVIS using IMPR_RESU_SP command. Can I do the same with strains?

Or in the best case, can I plot results as it will be on solid elements (show 'real' geometry a map results on it) so I can better interprate the results on inner and outher surface of pipe.

Michal


Attachments:
Pipe_elbow.png, Size: 158.94 KiB, Downloads: 211

Offline

Board footer