Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2017-10-10 00:22:30

dtp
Member
Registered: 2017-08-04
Posts: 4

execution code aster exit _5006=127,!!!![SOLVED]

i am trying to run a  aster study case and this keep happen

EXECUTION_CODE_ASTER_EXIT_5006=127,

please help!


i running salome meca 2017 on ubuntu 16.04

Last edited by dtp (2017-10-13 01:28:04)


Attachments:
RunCase_4.tar.gz, Size: 22.79 KiB, Downloads: 6

Offline

#2 2017-10-10 13:23:28

dbpatankar
Member
From: Roorkee, Uttarakhand, India
Registered: 2010-05-22
Posts: 131

Re: execution code aster exit _5006=127,!!!![SOLVED]

Your model is 3D and there is no constraint in Z direction.

Have a look at boundary condition again.

Offline

#3 2017-10-11 20:00:25

dtp
Member
Registered: 2017-08-04
Posts: 4

Re: execution code aster exit _5006=127,!!!![SOLVED]

thanks for your answer but i run again with all constrains and  same result ,another idea what could happen





here is .comm
DEBUT()


mesh0 = LIRE_MAILLAGE(FORMAT='MED', UNITE=20)

model = AFFE_MODELE(
    AFFE=_F(MODELISATION=('3D', ), PHENOMENE='MECANIQUE', TOUT='OUI'),
    MAILLAGE=mesh0
)

mater = DEFI_MATERIAU(ELAS=_F(E=2.1e+11, NU=0.3))

fieldma0 = AFFE_MATERIAU(
    AFFE=_F(MATER=(mater, ), TOUT='OUI'), MAILLAGE=mesh0, MODELE=model
)

bc = AFFE_CHAR_MECA(
    FACE_IMPO=_F(DX=0.0, DY=0.0, DZ=0.0, GROUP_MA=('bc', )), MODELE=model
)

load0 = AFFE_CHAR_MECA(
    FORCE_FACE=_F(FY=20000.0, GROUP_MA=('load', )), MODELE=model
)

reslin = MECA_STATIQUE(
    CHAM_MATER=fieldma0, EXCIT=(_F(CHARGE=load0), _F(CHARGE=bc)), MODELE=model
)

IMPR_RESU(FORMAT='MED', RESU=_F(RESULTAT=reslin), UNITE=80)

FIN()

Offline

Board footer