Atom topic feed | site map | contact | login | Powered by FluxBB | réalisation artaban
You are not logged in.
While doing analysis for a file, I forgot to add some post processing command for data extraction (it took about 20 minutes to solve). Is it possible to rerun for the post-processing only? I mean just extract the data to output file such as reaction and displacement instead of running the solver from zero?
Last edited by nirmaljoshi (2019-02-11 09:51:03)
Offline
hello
yes of course
please read my book, it is in it
keyword POURSUITE
and do not forget to introduce yourself in the ad-hoc section of the forum
jean pierre aubry
Offline
Hello,
with Asterstudy:
The first analysis must have been done with "Reusable" in order to keep the base.
1-2) Add a new stage with the post-processing
3-4) Run only the new stage
Konyaro
Last edited by konyaro (2019-02-06 09:33:56)
失敗は成功のもと (L'échec est la base de la réussite)
Offline
keyword POURSUITE
Seems it has been depreciated in 2018. (ref: code-aster.org/V2/doc/default/en/man_u/u4/u4.11.03.pdf)
and do not forget to introduce yourself in the ad-hoc section of the forum
jean pierre aubry
Done!
Thanks konyaro. I will try it and let you know the outcome.
Last edited by nirmaljoshi (2019-02-07 01:52:01)
Offline
@konyaro
I tried. But the post-processing stage (3 in your figure) doesnot run independently because both stages get selected. When I try to deselect stage 1, the stage 2 also gets deslected. How to deselect stage1 only?
Last edited by nirmaljoshi (2019-02-06 10:47:10)
Offline
You must click on stage 2 only. If it doesn't work that means you didn't save the base of the first analysis (Reusable) and that the results of the first stage don't exist anymore.
失敗は成功のもと (L'échec est la base de la réussite)
Offline
@konyaro: You are right but there is a small bug perhaps. In aster study, the "Reusable" checkmark appears checked by default while running the analysis but infact it is not checked during execution. We need to uncheck and recheck it again.
Thanks.
Offline
How about extracting results from file which have terminated before full execution (for example 22 of 100 steps get executed and remaining do not execute due to convergence problem or time limit)?
Offline