Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2010-07-16 22:07:11

Johannes_ACKVA
Member
From: Ingenieurbüro für Mechanik, DE
Registered: 2009-11-04
Posts: 738
Website

5-days Introduction to Salome-Meca

The next Seminar Salome-Meca Introduction organized by Ingenieurbüro für Mechanik will take place in September, 21th to 25th 2010, in the South of Germany. The registration form will be published here and on our website within the next days.

Regards, Johannes Ackva

______________________________________________________________________
Ingenieurbüro für Mechanik
Dr.-Ing. Johannes Ackva
Markgrafenstr. 21
D 91717 Wassertrüdingen


Ingenieurbüro für Mechanik
D 91717 Wassertrüdingen / Germany

www.code-aster.de                                                Training & Support for NASTRAN and CODE-ASTER

Offline

#2 2010-07-23 12:04:23

Jacopo
Member
From: Colle di Val d'Elsa, Italy
Registered: 2008-02-05
Posts: 565

Re: 5-days Introduction to Salome-Meca

Hi Johannes,
in this new corses do you present also modal and dynamic analysis with aster?

Saluti
Jacopo


Salome-Meca 2017.02 (Intel Xeon 8 Core x 2 RAM 32GiB) Ubuntu 16.04 LTS

Offline

#3 2010-07-27 09:40:23

Johannes_ACKVA
Member
From: Ingenieurbüro für Mechanik, DE
Registered: 2009-11-04
Posts: 738
Website

Re: 5-days Introduction to Salome-Meca

here the program and registration form, sorry for the delay.

To Jacopo: only modal analysis is treated. Dynamics (transient & harmonic analysis, damping, modal reduction etc.) is trained in a special dynamics 2-days seminar, see
(http://code-aster.de/index.php?option=c … &Itemid=75)
We offer this seminar on the website when we are asked by, let's say, 2 persons interested.

Regards, Johannes Ackva

______________________________________________________________________
Ingenieurbüro für Mechanik
Dr.-Ing. Johannes Ackva
Markgrafenstr. 21
D 91717 Wassertrüdingen


Ingenieurbüro für Mechanik
D 91717 Wassertrüdingen / Germany

www.code-aster.de                                                Training & Support for NASTRAN and CODE-ASTER

Offline

#4 2010-08-23 18:13:48

Johannes_ACKVA
Member
From: Ingenieurbüro für Mechanik, DE
Registered: 2009-11-04
Posts: 738
Website

Re: 5-days Introduction to Salome-Meca

there are still some places free for the seminar in September, 21th to 25th 2010. Johannes Ackva


Ingenieurbüro für Mechanik
D 91717 Wassertrüdingen / Germany

www.code-aster.de                                                Training & Support for NASTRAN and CODE-ASTER

Offline