Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2013-12-07 10:37:48

jeanpierreaubry
Guru
From: nantes (france)
Registered: 2009-03-12
Posts: 3,570

publication of my book "Beginning with Code_Aster"

hello

i am proud to announce the publication at Framabook of my book:

"Beginning with Code_Aster.
A practical introduction to finite element method using Code_Aster, Gmsh and Salome"

its is available at the following address
as a printed paper back for 58 euros (by lulu.comm)
as a pdf downloadable for free
as a zip archive of the LaTeX source code, open-source documents for an open source software !

http://framabook.org/14-beginning-with-code_aster/

any corrections or suggestions are welcomed for future editions

jean pierre aubry

Offline

#2 2013-12-07 11:58:26

AsterO'dactyle
Administrator
Registered: 2007-11-29
Posts: 255

Re: publication of my book "Beginning with Code_Aster"

GREAT §§§§§§§§§§§§§§§§§§§§§§§§§§§§!
Merci Jean-Pierre !


Code_Asterの開発者

Offline

#3 2013-12-07 18:34:11

Claws
Member
From: Denmark
Registered: 2009-03-23
Posts: 374

Re: publication of my book "Beginning with Code_Aster"

Very cool and congratulations on finishing it !

I will have a read-through and let you know if I find any problems.

Thanks for mentioning Kees and me. smile (although my name is spelled with a U smile )

Now you just have to update the book for every future version of CA.

/C


Opensuse 15
http://www.caelinux.org/wiki/index.php/Contrib:Claws/Code_Aster

Offline

#4 2013-12-07 21:46:43

mathieu.courtois
Administrator
From: France
Registered: 2007-11-21
Posts: 1,163

Re: publication of my book "Beginning with Code_Aster"

Congratulations !


Code_Aster release : last unstable on Ubuntu 16.04 64 bits - GNU Compilers

Please do not forget to tag your first post as *SOLVED* when it is!

Offline

#5 2013-12-08 03:54:42

datsnl
Member
Registered: 2013-03-12
Posts: 68

Re: publication of my book "Beginning with Code_Aster"

Congratulations.

More help for the users of Finite Element Analysis.

I will certainly have a look at it.

Cheers
Dharmit

Offline

#6 2013-12-08 11:30:02

jeanpierreaubry
Guru
From: nantes (france)
Registered: 2009-03-12
Posts: 3,570

Re: publication of my book "Beginning with Code_Aster"

hello Claws

Claws wrote:

Thanks for mentioning Kees and me. smile (although my name is spelled with a U smile )

i do not understand,
did i make a mistake and where, so as to correct it

Claws wrote:

Now you just have to update the book for every future version of CA.

as you know this is quite a task !

jean pierre aubry

Last edited by jeanpierreaubry (2013-12-08 11:30:44)

Offline

#7 2013-12-08 11:55:13

keeswouters
Member
From: kuringen
Registered: 2007-12-01
Posts: 144
Website

Re: publication of my book "Beginning with Code_Aster"

Hoi jean pierre

Very nice overview of code aster and related programs.
Handy to have a printed version of many frequently used commands and keywords, explanation and how to use them.
Thank you very much for the effort.

Last edited by keeswouters (2013-12-08 11:56:20)


kind regards - kees
--
I a parallel univers the laws of mechanics may be different.

Offline

#8 2013-12-08 17:51:43

Jacopo
Member
From: Colle di Val d'Elsa, Italy
Registered: 2008-02-05
Posts: 564

Re: publication of my book "Beginning with Code_Aster"

Great work!!!,
let me know if is it possible make a contribute for this work on your website smile, or on website linked in your comment

Saluti
Jacopo


Salome-Meca 2017.02 (Intel Xeon 8 Core x 2 RAM 32GiB) Ubuntu 16.04 LTS

Offline

#9 2013-12-09 19:01:50

delmas
Administrator
From: EDF R&D
Registered: 2007-12-12
Posts: 837

Re: publication of my book "Beginning with Code_Aster"

Congratulations !
I ordered two copies to Santa-Claus. I hope to see these books under the Code_Aster christmas tree soon !


Code_Aster release : unstable on (Ubuntu Precise Pangolin 12.04 64 bits) - GNU + Intel

Code_Aster. What else ?

Offline

#10 2013-12-09 19:39:46

paster
Member
Registered: 2009-08-14
Posts: 56

Re: publication of my book "Beginning with Code_Aster"

jeanpierreaubry wrote:

hello Claws

Claws wrote:

Thanks for mentioning Kees and me. smile (although my name is spelled with a U smile )

i do not understand,
CLAUS
did i make a mistake and where, so as to correct it

Claws wrote:

Now you just have to update the book for every future version of CA.

as you know this is quite a task !

jean pierre aubry

Offline

#11 2013-12-19 08:10:44

Sergejevicz
Member
From: Prague
Registered: 2013-05-21
Posts: 40

Re: publication of my book "Beginning with Code_Aster"

Congratulations! I'll browse it.

Offline

#12 2013-12-19 09:34:34

reiteres
Member
Registered: 2013-06-03
Posts: 558

Re: publication of my book "Beginning with Code_Aster"

jeanpierreaubry wrote:

hello

i am proud to announce the publication at Framabook of my book:

"Beginning with Code_Aster.
A practical introduction to finite element method using Code_Aster, Gmsh and Salome"

its is available at the following address
as a printed paper back for 58 euros (by lulu.comm)
as a pdf downloadable for free
as a zip archive of the LaTeX source code, open-source documents for an open source software !

http://framabook.org/14-beginning-with-code_aster/

any corrections or suggestions are welcomed for future editions

jean pierre aubry

It is really good to have viable literature on code_aster. Thank you for your good work!

Offline

#13 2013-12-19 14:45:51

syoon
Member
Registered: 2011-11-22
Posts: 109

Re: publication of my book "Beginning with Code_Aster"

I just took a brief look at the book and it will be a real help for anyone who wants to get used to ASTER.
Thanks!
(I will study more in coming days.)

Last edited by syoon (2013-12-19 14:46:24)

Offline

#14 2013-12-20 17:47:02

laconick
Member
From: Italy
Registered: 2010-10-28
Posts: 59
Website

Re: publication of my book "Beginning with Code_Aster"

Great job! I took a look at the pdf: not just for beginners I'd say. I'm going to order the hard copy to keep on my desk.

Offline

#15 2014-01-06 10:48:38

delmas
Administrator
From: EDF R&D
Registered: 2007-12-12
Posts: 837

Re: publication of my book "Beginning with Code_Aster"

Thank you Santa !


Attachments:
2014-01-06 10.43.44.jpg, Size: 987.79 KiB, Downloads: 284

Code_Aster release : unstable on (Ubuntu Precise Pangolin 12.04 64 bits) - GNU + Intel

Code_Aster. What else ?

Offline

#16 2014-01-08 16:25:47

toltec
Member
Registered: 2009-01-04
Posts: 92

Re: publication of my book "Beginning with Code_Aster"

Thank you Jean Pierre Aubry, a fantastic reference book, especially when trying to introduce someone to Aster!

Regards

Gary


Ubuntu 12.04
Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz

Offline