Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2017-10-07 20:05:19

xavierdestev
Member
Registered: 2017-01-12
Posts: 2

Hello from Compiegne

Hello everyone,

I am an Engineer from the compagny DeltaCAD.
I do Technical Assistance for Code Aster  for users from EDF.
I also do some finite element studies on demand using Code Aster and Salomé Méca.
For exemple, I have done a thermomechanical calculation with contact on a pump with these tools.

I also do some trainings sessions on Code Aster and Salomé méca for people outside EDF.

Respectfully. Xavier d'Estève.

Bonjour à tous,

Je suis un ingénieur de l'entreprise DeltaCAD.
Je fais de l'assistance technique sur Code Aster pour les utilisateurs de EDF.
Je fais aussi des études éléments finis sur demande utilisant Code Aster et Salomé Méca.
Par exemple, j'ai fais une étude thermo-mécanique avec contact sur une pompe pour EDF.

Je participe aussi à donner des formations pour des ingénieurs n’appartenant pas à EDF.

Cordialement.
Xavier d'Estève

Offline

#2 2017-11-29 03:46:03

henrygo
Member
Registered: 2017-11-29
Posts: 1

Re: Hello from Compiegne

I am new to Salome-meca 2017 or code_aster but have some experiences with FEM.
I searched a bit on how to run thermomechanical problems.
Need to edit command file to run thermal then mechanics problem. I cant find a way to do this with Salome-meca 2017. How do I create the temperature distribution files importable to mechanics analysis?

Can you give some instructions or tutorial videos?

Offline

Board footer