Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2018-11-21 17:28:32

Cesarone82
Member
Registered: 2017-10-09
Posts: 8

Salome_Meca 2018 netget error + error importing MED files from GMSH

Hi all,

I get the following warning launching Salome Meca 2018 last version:
****************************************************************
     Warning: module HYBRIDPLUGIN is improperly configured!
     Module HYBRIDPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
     Warning: module NETGENPLUGIN is improperly configured!
     Module NETGENPLUGIN will not be available in GUI mode!
****************************************************************
****************************************************************
     Warning: module GMSHPLUGIN is improperly configured!
     Module GMSHPLUGIN will not be available in GUI mode!
****************************************************************

I tried to import a med file from gmsh (attached), when i import in the mesh module nothing happens, and the MED file is modified (cannot open it anymore in gmsh), I get this error in the console:

_build/V2018.0.1_public_build/prerequisites/src/Medfichier-331-hdf51814-py2710-sw2012/src/ci/MEDfileVersionOpen.c [71] : Erreur à l'ouverture du fichier
/home/A21173/smeca/yamm_build/V2018.0.1_public_build/prerequisites/src/Medfichier-331-hdf51814-py2710-sw2012/src/ci/MEDfileVersionOpen.c [71] : /home/luca/esercizi Salome/study1.med
HDF5-DIAG: Error detected in HDF5 (1.8.14) thread 0:
  #000: /home/A21173/smeca/yamm_build/V2018.0.1_public_build/prerequisites/src/Hdf5-1814-cm362/src/H5F.c line 774 in H5Fclose(): not a file ID
    major: Invalid arguments to routine
    minor: Inappropriate type
/home/A21173/smeca/yamm_build/V2018.0.1_public_build/prerequisites/src/Medfichier-331-hdf51814-py2710-sw2012/src/ci/MEDfileClose.c [42] : Erreur à la fermeture du fichier
/home/A21173/smeca/yamm_build/V2018.0.1_public_build/prerequisites/src/Medfichier-331-hdf51814-py2710-sw2012/src/ci/MEDfileClose.c [42] :
/home/A21173/smeca/yamm_build/V2018.0.1_public_build/prerequisites/src/Medfichier-331-hdf51814-py2710-sw2012/src/ci/MEDfileVersionOpen.c [85] : Erreur à l'ouverture du fichier
/home/A21173/smeca/yamm_build/V2018.0.1_public_build/prerequisites/src/Medfichier-331-hdf51814-py2710-sw2012/src/ci/MEDfileVersionOpen.c [85] : /home/luca/esercizi Salome/study1.med
HDF5-DIAG: Error detected in HDF5 (1.8.14) thread 0:

DO you have any hint on what is the problem?

Regards

Last edited by Cesarone82 (2018-11-21 17:30:32)


Attachments:
study1.med, Size: 17.58 KiB, Downloads: 76

Offline

#2 2018-11-21 21:08:34

Cesarone82
Member
Registered: 2017-10-09
Posts: 8

Re: Salome_Meca 2018 netget error + error importing MED files from GMSH

Some additional details, i'm using debian 9.6

Offline

#3 2018-11-23 09:36:14

Cesarone82
Member
Registered: 2017-10-09
Posts: 8

Re: Salome_Meca 2018 netget error + error importing MED files from GMSH

Hi,

I found a solution for the incorrect opening of med files inside salome_meca, I reverted to a previous version od ubuntu 16.04, it seems the problem is cause by hdf5 version 1.10.

Still no solution found for the netgen, etc warning.

Offline

#4 2019-01-03 14:49:17

bpaillard
Member
Registered: 2015-10-16
Posts: 10

Re: Salome_Meca 2018 netget error + error importing MED files from GMSH

Hi all, I'm having the exact same issue. Any update on that topic ? Unfortunately going back to ubuntu 16.04 is not an option for me...

Offline

#5 2019-01-14 16:27:13

GFA
Member
Registered: 2013-02-22
Posts: 16

Re: Salome_Meca 2018 netget error + error importing MED files from GMSH

Hi,

Please... follow this steps:
1.- In Gmsh, export your mesh as .unv file.
2.- Your unv file start as:
   -1
  2411
...
3.- Replace this for:
    -1
   164
         1  SI: Meter (newton)         2
    1.0000000000000000E+0    1.0000000000000000E+0    1.0000000000000000E+0
    2.7314999999999998E+2
    -1
    -1
  2420
         1
SMESH_Mesh
         1         0         0
Global Cartesian Coordinate System
    1.0000000000000000E+0    0.0000000000000000E+0    0.0000000000000000E+0
    0.0000000000000000E+0    1.0000000000000000E+0    0.0000000000000000E+0
    0.0000000000000000E+0    0.0000000000000000E+0    1.0000000000000000E+0
    0.0000000000000000E+0    0.0000000000000000E+0    0.0000000000000000E+0
    -1
    -1
  2411
4.- Finally, you can import the file from mesh module of Salome and export as .med

Best Regards


Gerard Fortuny
Universitat Rovira i Virgili

Offline

Board footer