Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2019-09-11 23:58:45

Registered: 2019-09-11
Posts: 1

Hello from Florida

I a semi retired civil/mechanical engineer. Years ago did my thesis in dynamic structural FEA, then sporadically used it with various FEA software. Later specialized in failure analysis, root cause analysis, and trouble shooting structures, piping and rotating equipment problems with a strong focus on vibration analysis and flow induced vibration. I also have a patent for an acoustic attenuation device for which I would like to develop an analytical tool to support measured data for transmission and insertion loss … that brought me to Code Aster. But, I hope to find help considering that I have limited experience in FEA and CFD for acoustic analysis, and I have no prior experience with Code Aster.
Happy to be here!