Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2020-01-14 14:49:12

mikados
Member
Registered: 2019-05-28
Posts: 5

IMPR_RESU error: "-> Incohérence catalogue - fortran"

Bonjour everyone,

I'm trying to couple OpenFOAM and Code_Aster through the coupling library preCICE, where Code_Aster is used as a thermal solver for a solid. When trying to print the results of Code_Aster, Code_Aster freezes.
I'm using the following IMPR_RESU command:
IMPR_RESU(INFO=2, UNITE=80, FORMAT='MED', RESU=_F(RESULTAT=TEMP)),
to print the result in med format, in a file 'output-20.rmed'.

I have attached to this message the mess file, comm file, and the complete ouput of a run including the printed info from IMPR_RESU. A salient detail is that in this printed info is the following message:

...
...
Création du fichier au format MED 3.3.1.

  -> Ouverture du fichier MED en mode  3  CREATION.

  -> Incohérence catalogue - fortran
Ce message est un message d'erreur développeur.
Contactez le support technique.
TYPE POI1     :          0 MAILLES
TYPE SEG2     :        508 MAILLES
TYPE SEG3     :          0 MAILLES
...
...

I thought that maybe all group names had to have a name of maximum 8 characters (see: forum topic id=12630), but that didn't seem to solve anything. Can someone help me understand what is going wrong here?

Kind regards,

Michel


Attachments:
IMPR_RESU-error-data.tar.xz, Size: 14.56 KiB, Downloads: 28

Offline

#2 2020-01-15 22:47:16

AsterO'dactyle
Administrator
Registered: 2007-11-29
Posts: 312

Re: IMPR_RESU error: "-> Incohérence catalogue - fortran"

Hello,

Maybe your "DEFI_FICHIER is not correct
MED file is a BINARY file, not ASCII


Code_Asterの開発者

Offline