Welcome to the forums. Please post in English or French.

You are not logged in.

#26 2020-08-05 23:25:27

sb1966
Member
Registered: 2015-03-16
Posts: 178

Re: Installation on Ubuntu 20.04

Hi,
From the output you have shown viz.

salome_meca post-installation ...
./create_appli.sh: line 263: python: command not found
./create_appli.sh: line 287: ./salome_post_install.py: No such file or directory

it appears that there is still python name error.
1. Please make sure that you followed the step no 4 and 6 described in my post.
2. Following all the steps serially is important.
3. Only this much I can say now, based on your report.

Hope this helps.
Please let us know here, whether this works or not.

Regards.

Sukumar

Offline

#27 2020-08-29 10:07:07

Hems
Member
Registered: 2018-06-07
Posts: 9

Re: Installation on Ubuntu 20.04

Hi Sukumar,

Thanks a lot. I followed the procedure again as per your suggestion. It worked!

But I have same message as Roger has about the Europlexus module. I decided to ignore it for now.


Thanks and regards,
Hems

Offline

#28 2020-09-18 19:03:15

amvali
Member
Registered: 2020-09-17
Posts: 6

Re: Installation on Ubuntu 20.04

Hi there,

I followed instruction and install Salome-Meca, but still having problem with installation. Here what I got after installation:

amvali@amvali-VirtualBox:~$ ./salome_meca-2019.0.3-1-universal.run

=========================================================
Self Extracting salome_meca V2019.0.3_universal Installer
=========================================================

Enter the salome_meca install directory [default=/home/amvali/salome_meca] : salome_meca is in English, do you want to be in French ? [y/N] : n
Installation of salome_meca V2019.0.3_universal in /home/amvali/salome_meca/V2019.0.3_universal ...
Verifying archive integrity...
All good.
Done                                                                                                                                                   
./create_appli.sh: line 108: /salome_prerequisites_root.sh: No such file or directory
./create_appli.sh: line 109: /salome_modules.sh: No such file or directory
Creating salome_meca application in /home/amvali/salome_meca/appli_V2019.0.3_universal ...
sed: can't read /.config_appli_template.xml: No such file or directory
grep: salome_context.cfg: No such file or directory
salome_meca post-installation ...
./create_appli.sh: line 263: python: command not found
./create_appli.sh: line 287: ./salome_post_install.py: No such file or directory
The salome_meca application was successfully created.
To run the application:
$ /home/amvali/salome_meca/appli_V2019.0.3_universal/salome
Adjusting wishexecutable /home/amvali/salome_meca/V2019.0.3_universal/tools/Code_aster_frontend-20190/etc/codeaster/profile.sh
Initialize terminal and editor for Code_aster
Final configuration

Would you please help me?

Thanks,
Ali

Offline